About The Maintenance Kit - Xerox DocuPrint N24 User Manual

About the Maintenance Kit

About the
The DocuPrint N40 also has a Maintenance Kit which is
customer installable. This kit should be installed after
Maintenance Kit
every 300,000 impressions. You will be told by a message
on the Display when to install this kit. Instructions for
installing this kit are in Appendix B of the DocuPrint N40
System Administrator Guide.
The Maintenance Kit is comprised of three items:
• Fuser Cartridge
• Bias Transfer Roll (BTR)
• 15 feedrolls (three for each paper input tray)
The Fuser Cartridge, feedrolls and BTR have expected
useful lives of 300,000 impressions. Although printing can
continue, to ensure optimum print quality you should
order and replace these parts as soon as possible.
Chapter 6: Replacing Your Toner Cartridge 6-9