Clearing Area A (With Duplex Module) - Xerox DocuPrint N24 User Manual

Clearing Area A (With
Duplex Module)
1
Remove any paper from the Face-up Tray,
then open the Duplex Module.
4
Close Door A, then reattach the Face-up
Bin.
Follow the procedure below to clear a paper jam from
Area A when the Control Panel display reads
and there is a Duplex Module installed on the
Are a A
printer.
2
Open Door A.
Chapter 5: Clearing Jams and Jam Recovery
If the Control Panel message
indicates an Area B jam, continue to
the section "Clearing Area B"
(page 5-12).
Paper Jams
C lear
5-9