Xerox DocuPrint Network Laser Printers Information Manual page 51

14
Select the Network Card Tab. A new dialog box is brought
to the front and displays information about frame type
and connectors.
15 Be certain the printer is enabled and the connector and
frame type are correct.
The Xerox CentreDirect External Print Server
(External Ethernet Adapter) has only an RJ45
connector.
16
If any changes are made, reset the printer from the
Control Panel or if connected to the network with a Xerox
External Ethernet Adapter, cycle the power to the Adapter
off and on and allow two minutes for the printer to
reattach to the desired fileserver.
17 Run a test print again. If the test print does not print,
contact Xerox Customer Service.
Chapter 3: Novell NetWare Setup
NetWare Troubleshooting
3-11