Xerox DocuPrint Network Laser Printers Information Manual page 71

14
Click the Browse button and select the directory
containing the Windows NT drivers
(<CD Drive>:\instal\winnt40) then click Open.
15 Select the *.INF file then click OK.
16 The Wizard will return you to the previous dialog. Verify
the path and file name are correct and click OK.
17
At the next dialog, enter a name for the printer and select
whether you want that printer to be the default then click
Next>.
18 If the printer will not be shared, click Next>. To share the
printer, enter a Share Name, check the share checkbox,
then click Next>.
19 At the next dialog it is recommended that you print a test
page. Click Finish.
20
Wait for the Test Print to print. A new dialog will ask for
confirmation of the test print, click Yes.
21 Send a print job to the printer.
22 Check the print job for print quality. If print quality
problems exist, use the print quality section of the
DocuPrint System Administrator Guide to correct the
problem.
23 If your print job did not print, see the section
Troubleshooting" (page 4-20)
Chapter 4: Windows / Peer-to-Peer Network Setup
Windows NT 4.0 Network
"Windows
to correct the problem.
4-19