To Reset Your Centredirect External Print Server (External Ether- Net Adapter) To Factory Defaults; To Reset Your Centredirect External Print Server (External Ether- Net Adapter) - Xerox DocuPrint Network Laser Printers Information Manual

Resetting the Printer
To Reset your
CentreDirect External
Print Server (External
Ethernet Adapter) to
factory defaults
2-24 DocuPrint Technical Information Guide
1
Set the DIP switches that are located on the rear of the
CentreDirect External Print Server (External Ethernet
Adapter) to D1 in the down position and D2 in the down
position.
2 Unplug the power cord from the CentreDirect.
3 Wait 5 seconds and plug the power cord into the
CentreDirect.
4
Wait 30 seconds for the Centre|Direct to start up (reboot).
5 Quickly toggle DIP Switch D1 up and down at least 10
times.
6 Return the DIP switches to normal operation settings (i.e.
D1 up / D2 up or D1 up / D2 down).
settings for your CentreDirect External Print
Server (External Ethernet Adapter)" on page 25.
7
Unplug the power cord from the CentreDirect.
8 Wait 5 seconds and plug the power cord into the
CentreDirect.
See "DIP Switch