Installing Docucolor 40 Cp Software And Fonts - Xerox DocuColor 40CP Getting Started Manual

49 Installing DocuColor 40 CP software and fonts

Installing DocuColor 40 CP software and fonts
Before you begin each of the following installation procedures, determine where you
want to install each item on your hard disk. By default, the files are placed in the
following locations:
• The ColorSync Profiles are placed in the System Folder:Preferences folder on your
hard disk.
If your system uses ColorSync, you must install these profiles in the ColorSync
Profiles folder inside the System Folder:Preferences folder. You should install the
ColorSync profiles only if your system uses them.
• Downloader is placed in a folder named "Xerox" on the top level of your hard disk.
• Print Calibrator is placed in a folder named "Xerox" on the top level of your hard
disk.
An installer is not provided for the Mac OS screen fonts; they must be copied
N :
OTE
directly from the User Software CD to the System Folder:Fonts folder on your hard
disk. For instructions, see "Screen fonts" on page 51.
T M OS
O INSTALL AC SOFTWARE
1. On the User Software CD or your hard disk, double-click to open the Installers folder.
If you are installing:
ColorSync profiles
Downloader
Print Calibrator
2. Double-click the Installer icon.
:
To open the ColorSync™ Profiles Installer folder
To open the Downloader folder
To open the Print Calibrator folder
Double-click: