Xerox DocuColor 40CP Getting Started Manual page 21

5 Setting up the DocuColor 40 CP as a PostScript printer
10. Using a maximum of 20 characters, enter a name for the DocuColor 40 CP (or leave the
default name) in the Printer Name box.
This name will be used in the Printers and queue windows.
Entering more than 20 characters may cause printing problems with some
N :
OTE
network applications.
11. If you want the DocuColor 40 CP to be the default printer select Yes; if not, select No.
12. Select No to printing the test page and click Next.
You will print the test page after you finish configuring the printer.
The necessary files are installed to your hard disk. When installation is complete, the
Properties dialog box appears.
13. Click OK.
You are notified that Setup is complete.
14. Click Exit.
The icon for your newly installed printer appears in the Printers window.
15. Use the instructions for connecting to your network type (see "Completing the
Windows 95 connection" below).