Installing User Software On A Mac Os Computer; Installing Mac Os Software - Xerox DocuColor 40CP Getting Started Manual

45 Installing Mac OS software

Installing User
Software on a
Mac OS
Computer
The general steps for installing the DocuColor 40 CP user software and setting up
printing on a Mac OS-based computer are:
• Install the Adobe PostScript printer driver and DocuColor 40 CP PostScript Printer
Description files (PPDs).
• Set up the DocuColor 40 CP in the Chooser.
• Install Downloader.
• Install Print Calibrator.
• Install the ColorSync ™ profiles.
• Install the screen fonts.
• Copy additional color-reference and application-specific files from the User Software
CD as needed.
Installing Mac OS software
The Installers folder on the User Software CD contains the following installer folders:
• ColorSync ™ Profiles Installer—DocuColor 40 CP ColorSync ICC profiles installer
• Downloader—Downloader installer
• Print Calibrator—Print Calibrator installer
• Printer Driver—Adobe PostScript printer driver and PPD installer
An installer is not provided for the Mac OS screen fonts; they must be copied
N :
OTE
directly from the User Software CD to the System Folder:Fonts folder on your hard
disk. For instructions, see "Screen fonts" on page 51.
In addition, the User Software CD contains various color files. These files can be
copied or installed from the CD and placed in the appropriate locations on your hard
disk (see "Copying color files from the User Software CD" on page 52).
• PostScript CMYK color reference file
• PostScript PANTONE Coated color reference file