Power Saver Feature - Xerox PHASER 5400 User Manual

There is a problem (in this case, a paper jam has occurred


while feeding from Tray 3):
For information on using the menus, refer to the Advanced
Features and Troubleshooting Manual on your printer's CD-ROM.

Power saver feature

Products that carry the ENERGY STAR
energy, help you save money on Utility bills, and help protect the
environment.
Your Phaser 5400 laser printer is preset at the factory to enter a "low
power" state after a specified period of non-use. In this mode, the
printer systems are shut down. When a print job is initiated, it will
wake up the printer. The recovery time is approximately 30 seconds.
The default setting (*) for your printer to enter a power saver mode is
60 minutes. To change the default time setting, follow these steps on
the control panel:
1. Press the Menu keys (labeled 1 or 5) to scroll to the
2. Press the Item keys (labeled 2 or 6) to scroll to
3. Press the Value keys (labeled 3 or 7) to scroll to the appropriate
selection: Off, 15, 30, 60*, 90, 120, or
4. Press the Enter key (labeled 4).
Press the On Line key (labeled 0) to exit the menus.
5.
For additional information on power consumption and settings, refer
to the Advanced Features and Troubleshooting Manual.
User Guide
Tray 3 Jam-
Open Tray 3
®
label are designed to use less
System
Power Saver.
180 minutes.
Menu.
5