VERITAS NetBackup 5240 Appliance Product Description page 16

System Status LED states (continued)
Table 1-5
Color State
Green ~1 Hz blink
Amber ~1 Hz blink
Amber Solid on
NetBackup 5240 Appliance control panel
Criticality Description
Degraded System degraded (continued):
(continued)
BMC booting Linux. (Indicated by Chassis ID
■
solid ON). System in degraded state (no
manageability). Control has been passed from
BMC uBoot to BMC Linux itself. It will be in
this state for 10-20 seconds.
BMC Watchdog has reset the BMC.
■
Power unit sensor offset for configuration
■
error is asserted.
Hard disk drive HSC is off-line or degraded.
■
Non-critical Non-fatal - However, the system is likely to fail:
The system is Critical threshold crossed – Voltage,
■
operating in a temperature (including HSBP temp), input
degraded state power to power supply, output current for
with an main power rail from power supply and
impending failure PROCHOT (Therm Ctrl) sensors.
warning.
VRD Hot asserted
■
However, the
Minimum number of fans to cool the system
■
system is still
not present or failed
functioning.
Hard drive fault
■
Power Unit Redundancy sensor – Insufficient
■
resources offset (indicates not enough power
supplies present)
Correctable memory error threshold has been
■
reached for a failing DIMM when the system
is operating in a non-redundant mode.
Critical, Fatal alarm – system has failed or shutdown:
non-recoverable
CPU CATERR signal asserted
■
– System is
MSID mismatch detected (CATERR also
■
halted
asserts for this case)
CPU1 is missing
■
CPU Thermal Trip
■
No power – power fault
■
DIMM failure when there is only one DIMM
■
present; no other good DIMM memory
present
About the NetBackup 5240 Appliance 16