Table of Contents
Advertisement
System Guide
Loading XJDC/Unix
Common Controller
If there are problems starting the software, check the console
window for messages.
The Xerox Job Description Compiler is loaded by entering the
following on the command line:
/opt/XRXnps/bin/XJDC [-option[,option...]] <filename> ..
The filename is the name of the JSL file that is to be compiled.
The JSL filename is required to terminate with the suffix .jsl or
.JSL. The filename may contain path information.
Many options may be specified and shown in the above
example. The option may be specified in any order and are 3-
character abbreviations. A list of the available options and their
abbreviations are as follows:
•
REPlace / NOReplace: Replace or backup existing PDL
object files
•
DISplay / NODisplay: Display or suppress XJDC messages
•
PRInt / NOPrint Generate: JSL compilation listing always or
only when errors/warnings occur
•
TRUncate / NOTruncate: Truncate or accept JSL source
lines after 72 characters
•
LABel / NOLabel: Generate or suppress 128-byte Xerox
standard label
•
COMpile / SCAn: Compile with output or scan only
•
SINglebyte / DOUblebyte: Use singlebyte or doublebyte
code and printer carriage control translation files
•
Vx: LPS PDL version number, x = 10, 2, 35, 3615, 37, 38, 39,
40, 50, 3A, M10
•
PAPersizes: Paper size to use for PDL VM10, s = USLEGAL
/ USLETTER / A4
•
DATed = d: Date format, d = US / EUROPEAN
•
PAGinate = p: Lines per page, n = 0, 5 to 999 (0 means no
pagination)
•
OUTpath=p: Base directory for output files, p = <path>,
default is current directory (Note that ~ is not supported.)
Troubleshooting
9-15
Advertisement
Table of Contents
