Table of Contents
Advertisement
System Guide
Other security tips
Configure for xrxusr
Common Controller
•
An enabled password.
•
The same user identification (uid) as used for the
clientworkstation account.
•
The same group identification (gid) as used for the client
workstation account.
The DocuSP controller can be configured to force the user to log
in as xrxusr when the system is rebooted. To do this, perform the
following:
1. Set up the xrxusr password as root user in a terminal type:
passwd xrxusr <enter> as root user. The user will be
prompted for the new password.
2. Edit the DocuSP startup file as root user in a terminal window
type: cd /opt/XRXnps/XRXinit/bin <enter>. Make backup of
original startup file by typing: cp XRXnps_Start
XRXnps_Start.orig. Type:/usr/openwin/bin/textedit
XRXnps_Start <enter>. In the Text Editor window, scroll
down to the bottom of the file and add a # sign in front of the
line that reads: su - $user
3. Reboot and configure xrxusr login environment. Reboot the
system. The CDE login prompt window will appear. Choose
CDE as the desktop environment. This only needs to be
configured at the first login. This will need to be re configured
with every DocuSP upgrade. With every boot, the operator
will need to log in as xrxusr. This has no other impact on
system operation.
Security and Network Setup
4-13
Advertisement
Table of Contents
