Overview Of Security; Changing The Logon Level - Xerox 701P40211 System Manual

Document services platform series common controller
Table of Contents

Advertisement

Security and Network Setup

Overview of Security

Changing the logon level

4-2
The purpose of the security section is to provide information on
security regarding the DocuSP controller and the Solaris
Operating System. This section explains the new DocuSP
"Security Profile" policy and associated scripts provided that help
protect the system against unauthorized access and
modification. This feature has been added in response to
customer and enterprise security concerns. It is based on
Solaris Security Blueprints papers and tools as well as previous
security scripts created by Xerox.
The DocuSP software defaults to the Walk Up User access level
when the DocuSP software is started.
To log into the DocuSP as the System Administrator or Trusted
User, perform the following:
1. Select [System] from the DocuSP Print Services window.
2. Select [Logon]. The Logon dialog is displayed.
3. Select the Trusted User or System Administrator access level
and enter the correct password.
The initial passwords for Trusted User and System
Administrator can be obtained from your Xerox Service
Representative
NOTE: The various system passwords need to be changed
as soon as an install is complete. It is also advised that you
should have a process in place for changing the passwords
on a regular basis.
NOTE: The System Administrator should verify access to the
Xerox application for all levels before the service installation
personnel leave the site.
NOTE: To maintain security, it is recommended that any
restricted access login be terminated as soon as the session
has been completed.
System Guide
Common Controller

Advertisement

Table of Contents
loading

Table of Contents