Output Settings Tab Settings - Xerox WorkCentre M24 User Manual

U G ( P )
S E R U I D E R I N T
Job Type
Normal Print
Secure Print
Sample Print
Delayed Print
User ID
2 – 3 4

Output Settings Tab Settings

This section describes the settings in the Output Settings tab.
Job Type
You can specify the print function from among Secure Print,
Sample Print, and Delayed Print.
Secure Print: A function that temporarily stores print jobs in the
printer, and prints the job when instructed from the printer control
panel.
• If you want to output secure prints, set the User ID and
password for Print Type in the Configuration tab.
Sample Print: A function that outputs only 1 set when multiple
sets are specified. If the job is as specified, the remaining sets are
printed.
Delayed Print: A function that temporarily stores print jobs in the
printer, and prints them at a scheduled time.
Select when you do not want to output secure prints, sample
prints, or delayed prints.
Select when you want to output secure prints.
Select when you want to output sample prints.
NOTE: The Collated setting must be selected in the Page Setup
tab when using Job Type.
Select when you want to output delayed prints.
Displays the User ID for Job Type. The User ID displayed is the
User ID specified on the Configuration tab. This option can only be
selected when the setting on the Configuration tab has been
completed. This is a display-only item and cannot be changed in
User ID.