Xerox WorkCentre M24 User Manual page 371

Color Balance - Yellow,
Magenta, Cyan, Black
Original Orientation
Image Rotation
This sets up the default for each density level, Low Density,
Medium Density, and High Density, for Yellow, Magenta, Cyan and
Black in Color Balance on the Image Quality screen.
The defaults are all 0.
NOTE: The values set here will also be applied to Black and
Single Color modes.
This sets up the default for Original Orientation on the Scan
Options screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, Head to Top.
Setting
0
1
This sets up the default for Image Rotation on the Scan Options
screen. On during Auto refers to Auto Paper selection for Paper
supply or Auto % for Reduce/Enlarge.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 1, On during Auto.
Setting
0
1
2
U G ( M
S E R U I D E A C H I N E
Description
Head to Top
Head to Left
Description
Always On
On during Auto
Off
A )
D M I N I S T R A T O R
4 – 3 7