Chapter 10: Using Your Printer With A Macintosh; Installing Software For Macintosh - Xerox Phaser 3300MFP User Manual

10
Using Your Printer with
a Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
N : Some printers do not support a network
OTE
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User Guide.
This chapter includes:

• Installing Software for Macintosh

• Setting Up the Printer
• Printing
• Scanning
37
Using Your Printer with a Macintosh
Installing Software for
Macintosh
Install the Printer driver
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click CD-ROM icon that appears on your
Macintosh desktop.
5
Double-click the MAC_Installer folder.
6
Double-click the MAC_Printer folder.
7
Double-click the Xerox Phaser 3300MFP_OSX icon.
8
Enter the password and click OK.
9
Click Continue.
10
Select Easy Install and click Install.
11
After the installation is finished, click Quit.
N
:
OTE
• After installation, you need to set up the connection between
the printer and your computer. See "Setting Up the Printer"
on page 38.
Uninstall the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Printer folder.
5
Double-click the Xerox Phaser 3300MFP_OSX icon.
6
Enter the password and click OK.
7
Click Continue.
8
Select Uninstall and then click Uninstall.
9
When the uninstallation is done, click Quit.