Install The Scan Driver; Setting Up The Printer; For A Network-Connected Macintosh - Xerox Phaser 3300MFP User Manual

Install the Scan driver

1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the Twain folder.
6
Double-click the Xerox Scan Installer icon.
7
Enter the password and click OK.
8
Click Continue.
9
Click Install.
10
After the installation is finished, click Quit.
Uninstalling the Scan driver
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the Twain folder.
5
Double-click the Xerox Scan Installer icon.
6
Enter the password and click OK.
7
Click Continue.
8
Select Uninstall from the Installation Type and then Click
Uninstall.
9
When the uninstallation is done, click Quit.
38
Using Your Printer with a Macintosh

Setting Up the Printer

Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.

For a Network-connected Macintosh

N
: Some printers do not support a network
OTE
interface. Before connecting your printer, make sure
that your printer supports a network interface by
referring to Printer Specifications in your Printer User
Guide.
1
Follow the instructions on "Installing Software for
Macintosh" on page 37 to install the PPD file on your
computer.
2
Open Print Center or Printer Setup Utility from the
Utilities folder.
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Print & Fax.
3
Click Add on the Printer List.
•For MAC OS 10.5, press the "+" icon then a display
window will pop up.
4
For MAC OS 10.3, select the Rendezvous tab.
•For MAC OS 10.4, click Default Browser and find the
Bonjour.
•For MAC OS 10.5, click Default and find the Bonjour.
The name of your machine appears on the list. Select
XRX000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your machine.
5
For MAC OS 10.3, if Auto Select does not work properly,
select Xerox in Printer Model and your printer name in
Model Name.
•For MAC OS 10.4, if Auto Select does not work properly,
select Xerox in Print Using and your printer name in
Model.
•For MAC OS 10.5, if Auto Select does not work properly,
select Select a driver to use... and your printer name
in Print Using.
Your machine appears on the Printer List and is set as the
default printer.
6
Click Add.