Using Your Printer With A Macintosh; Installing Software For Macintosh - Xerox Phaser 6110MFP User Manual

8
Using Your Printer with
a Macintosh
Your printer supports Macintosh systems with a built-in USB
interface. When you print a file from a Macintosh computer, you
can use the CUPS driver by installing the PPD file.
This chapter includes:

• Installing Software for Macintosh

• Setting Up the Printer
• Printing
• Scanning
29

Using Your Printer with a Macintosh

Installing Software for
Macintosh
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver (only available when you use a printer
which supports the PostScript
Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
Install the Printer driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Printer folder.
6
Double-click the Xerox SPLC Installer icon.
7
Enter the password and click OK.
8
The Xerox SPL Installer window opens. Click Continue and
then click Continue.
9
Select Easy Install and click Install.
10
After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Printer folder.
5
Double-click the Xerox SPLC Installer icon.
6
Enter the password and click OK.
7
The Xerox SPL Installer window opens. Click Continue and
then click Continue.
8
Select Uninstall and then click Uninstall.
9
When the uninstallation is done, click Quit.
driver), for printing on a