For A Usb-Connected Macintosh; Installable Options - Xerox Phaser 3300MFP User Manual

For a USB-connected Macintosh

1
Follow the instructions on "Installing Software for
Macintosh" on page 37 to install the PPD file on your
computer.
2
Open Print Center or Printer Setup Utility from the
Utilities folder.
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Print & Fax.
3
Click Add on the Printer List.
•For MAC OS 10.5, press the "+" icon then a display
window will pop up.
4
For MAC OS 10.3, select the USB tab.
•For MAC OS 10.4, click Default Browser and find the
USB connection.
•For MAC OS 10.5, click Default and find the USB
connection.
5
Select your printer name.
6
For MAC OS 10.3, if Auto Select does not work properly,
select Xerox in Printer Model and your printer name in
Model Name.
•For MAC OS 10.4, if Auto Select does not work properly,
select Xerox in Print Using and your printer name in
Model.
•For MAC OS 10.5, if Auto Select does not work properly,
select Select a driver to use... and your printer name
in Print Using.
Your machine appears on the Printer List and is set as the
default printer.
7
Click Add.
39
Using Your Printer with a Macintosh

Installable Options

After setting up for your printer, you can set some more
detailed options.
1
Open Print Center or Printer Setup Utility from the
Utilities folder.
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Print & Fax.
2
Select your printer model name.
3
Click Show Info.
•For MAC OS 10.5, click Options & Supplies...
4
Select Installable Options tab.
•For MAC OS 10.5, Select Driver tab.
5
Configure each items in Installable Options window.
•Tray n: If the machine have optional tray n, you have to
check the tray name.
•Duplex Unit: If the machine has duplex unit, you have t
o check this item.
•Printer Memory: If you installed additional printer
memory, you have to configure the size of memory.
6
Select Apply Change.