Table of Contents
Advertisement
Setting Parameters in the Job Parameters Window
In the
list, select the required tray. If you select
3.
Tray
with the specific paper size will be used.
In the
list, select the desired trim size.
4.
Trim Size
the finished, trimmed document. You can adjust your page size by
adjusting the trim size.
•
If you select
Custom
desired height in the
•
Select
or
Portrait
an unsuitable template might be selected and the job might be
cropped as a result.
Note: If you set the trim size to be smaller than the page size set in the DTP
application, some of the data is cropped. Setting a larger trim size results in a
larger border on the printed page.
Template
If you have the Pro configuration, in the
1.
the following options:
•
: to choose a predefined Spire CX250 color server
System
imposition template.
•
: to choose a user defined Spire CX250 color server
User-defined
imposition template.
In the
list, select an available template.
2.
Template
In the
list, select the number of pages to place horizontally.
3.
Columns
The rows and columns indicate how the pages will be placed on the
sheet.
, define a custom trim size and type the
box, and the desired width in the
H
. If the wrong orientation is specified
Landscape
Category
193
, any tray
Auto
is the size of
Trim size
box.
W
area, select one of
Advertisement
Table of Contents
