Xerox CX240 User Manual page 196

186
of survey forms. In such a case, it is best to emulate the offset before the job
actually goes to offset printing. The Spire CX250 color server supports the
device link CMYK emulation methods.
Note: RGB colors are not affected by the CMYK workflow.
Use the
CMYK workflow
intent for CMYK elements. All printers, monitors, and scanners have a
range of colors (gamut) that they can output (or view, in the case of a
scanner). If a color needs to be output and is outside the gamut of the
output device, it must be mapped to another color that exists within the
gamut.
Use rendering intent to compress out-of-gamut colors into the color
capability of the press you are using. You can select any rendering intent
value for CMYK elements from the
for CMYK is
Relative Colorimetric
In addition, you can emulate the paper tint and adjust the white point
value of the used paper stock. For example, if you want to simulate pink
paper while using white paper, use the corresponding emulation profile
and select
Emulate source paper tint
To select CMYK workflow options:
In the list, select one of the following options:
1. Original
•
to print the CMYK elements without any color
Direct:
transformation.
•
Use Source CSA:
file.
In the list, select the required emulation.
2. Emulation
Note: The system emulates the selected option during the RIP process. GCR
(Gray Component Replacement) and CMYK Emulation do not affect the
processed job.
Appendix A– Setting Parameters
parameter to specify the required rendering
Rendering intent
.
.
to use the embedded CSA from the PostScript
list. The default value