Remote Scan Application
Remote Scan Application
Before you begin using the remote scan application:
•
Enable remote scanning in the Spire CX250 color server Settings
window (see
on page 167)
Scan
•
Install the remote scan application on your client workstation. You can
find the setup file,
RemoteScan.exe
Spire CX250 color server.
To open the remote scan application and connect to the Spire CX250
color server:
From the
menu, select
1.
Start
>
Application
Remote Scan
Note: By default, the remote scan application remembers your last connection.
When you connect the first time, or to connect to a different Spire
2.
CX250 color server, enter the server hostname or IP address in the
Server Name or IP
The remote scan application is connected to the Spire CX250 color
server and you are ready to begin working. By default, the last scan box
you used is displayed.
, in the
>
Programs
Creo
.
list, and click
.
Connect
on the
Utilities\PC Utilities
>
Remote Scan
73