Xerox CX240 User Manual page 200

190
In the list, select one of the defined gradation tables.
Gradation
Note: The default setting is None. No gradation table is applied to your job.
Brightness
Use this option to make last-minute adjustments to the print job after
proofing.
To select a brightness level for a job, move the
required brightness level (the range starts from
-15%, to , which applies +15%).
Dark
Contrast
Adjust the option to control the difference between light and
Contrast
dark tones in your image.
To select a contrast level for the print job, move the
the required contrast level (the range starts from
-10%, to , which applies +10%).
More
Appendix A– Setting Parameters
slider to the
Brightness
, which applies
Light
slider to
Contrast
, which applies
Less