Xerox CX240 User Manual page 120

110
In the list, select the desired tray. The default is
3. Tray
print the calibration chart on any paper size that is equal to or larger
than A4 or Letter.
In the
4. Screening Method
In the
5. Media Type
print job. The default setting is
is selected, your job is printed on the media type that is defined on the
Xerox DocuColor 240/250 printer-copier.
In the
6. Image Quality
Select the
7. Gloss Mode
printing.
In the
8. Number of copies
print.
Tip: It is recommended that you print at least 10 copies of the calibration
chart, and then use one of the last copies printed.
Click .
9. Print
The calibration chart prints.
Click .
10. Next
list, select the screening method.
list, select the media type that you are using for the
Use Printer Settings
list, select the image quality type.
check box if you want to calibrate for glossy
box, enter the number of copies you want to
Chapter 7– Color Workflow
. You can
Tray 1
. When this option