Xerox CX240 User Manual page 210

200
APR
Note: This parameter is available only if you have the Pro configuration.
In the
1. APR options
•
Print with high res:
with high-resolution images that are located in a specified APR
path.
•
Print with low res:
images—for example, for proofing purposes.
In the
2. Use APR mask from
•
PostScript image:
resolution image file.
•
uses the masking data contained in the high-resolution
High res:
image file.
•
uses the masking data that is common to both high-
Both:
resolution and low-resolution image files. For example, if the
images defined by the two sets of masking data overlap, the
overlapping area is RIPed.
Note: If the masking data in the low-resolution image file defines a
completely different part of an image than the masking data in the
high-resolution file, no masking data is used.
Appendix A– Setting Parameters
area, select one of the following options:
replaces low-resolution images in your job
prints the job with the existing low-resolution
area, select one of the following options:
uses the masking data contained in the low-