The Web Viewer - Xerox CX240 User Manual

24

The Web Viewer

Chapter 2– Spire CX250 Color Server Basic Configuration Workflows
To connect to the web center from a client workstation:
Important: To connect to the Web Center from a client workstation, you must
first enable the web connect service on the Spire CX250 color server, see
Remote Tools Setup on page 148.
On your desktop, click the
1.
When the Internet Explorer starts, in the address field type:
2.
http://<host name>—for example, if the CX250 station name is
CX250_12, type http://CX250_12.
Note: You can also use the Spire CX250 color server IP address—for
example, http://192.168.92.10.
Important: If you would like to connect to the Spire CX250 color server
from a Macintosh client workstation, contact your system administrator to
add the Spire CX250 color server name to the DNS. This is required since
Windows name resolution protocols are not supported in Macintosh. The
DNS addition is required when clients go through a main server on the
network.
The Spire CX250 color server Web Center appears.
The Web Viewer page consists of three tabs and enables you to view the
jobs that currently reside in the Spire CX250 color server Queues window
and Storage window, and also view messages that currently appear in the
Messages window. This information is important when you print from a
client workstation because it enables you to monitor your jobs in the
queues and then make any necessary changes.
icon.
Internet Explorer