124
Printing the Job with the Calibration Table
Now that you have calibrated the paper you are going to use for printing,
you can select the calibration table to print any job on the same paper stock
using the same screen type. You can print the reference job you printed
before with the new calibration table to evaluate the calibration results.
To print the reference job:
In the Spire CX250 color server workspace, suspend the
1.
.
Queue
Import the job.
2.
Double-click the job to open the Job Parameters window.
3.
For more information about tabs in the Job Parameters window, see
Parameters in the Job Parameters Window
On the
4.
Paper Stock
On the
tab, select the calibration you created for the particular
5.
Color
stock from which you printed.
On the
tab, select the screening method you used for the
6.
Color
selected calibration.
Set all other desired parameters, and then click
7.
Parameters window.
Activate the
8.
Process Queue
job.
If you see that the print out has any color imperfection, review the job
parameter settings and make changes if necessary. If there are still color
imperfections, perform machine maintenance and repeat the calibration
process.
on page 176
tab, select the desired paper stock.
and
Print Queue
Chapter 7– Color Workflow
Process
Setting
.
to close the Job
OK
, and inspect the printed