Printing A Business Card Job - Xerox CX PRINT SERVER 550 User Manual

Printing a business card job

Printing a business card job
Use the step-and-repeat imposition method to print multiple copies
of the same business card on one press sheet.
Requirements:
This example assumes that your job contains one-sided business
cards that are 50 mm × 90 mm (1.96 in. × 3.54 in.), imposed on A3
(Tabloid) paper.
1. Click the suspend button to suspend the Process queue.
2. From the File menu, select Import.
3. Import your business card file to the ProcessPrint virtual
printer.
The file is imported to the Process queue with a Waiting
status.
4. In the suspended Process queue, double-click the business
card file.
The job parameters window appears.
5. In the job parameters window, under Print, select the Paper
Stock parameter.
6. In the Paper size list, select 11 x 17.
7. Click the Imposition tab.
8. In the Imposition method list, select Step & Repeat.
9. Select the parameter, and set the values as follows:
a. For Trim size, select Custom.
b. For H, type
1.96
c. For W, type
3.54
A preview of the layout is displayed below.
10. For Trim orientation, make sure that the Landscape option
is selected. To change the trim orientation, in the Job
Parameters window, select Print and then select Layout.
Select the desired orientation.
11. Select the Templates parameter, and set the values as
follows:
a. In the Layout list, select Best Fit.
The CX print server determines how many business cards
can fit on each sheet and calculates the best fit.
b. For Print method, make sure that Simplex is selected,
because your business cards are one-sided.
12. Click the Preview button to preview the layout.
The Preview window appears, displaying a schematic
representation of your imposition layout.
inches or mm.
50
inches or mm.
90
63