Deleting Exceptions From Your Job; Dynamic Page Exceptions And Setpagedevice Commands; Printing Dynamic Page Exceptions - Xerox CX PRINT SERVER 550 User Manual

Deleting exceptions from your job

Deleting exceptions from your job

Dynamic page exceptions and setpagedevice commands

Printing dynamic page exceptions

10. Under Image Position, do one of the following:
To keep the image in the same position as the rest of the
●
job, make sure the Same as job check box is selected.
To shift the image on the second side of the sheet
●
according to the image shift on the first side of the sheet,
select the Same on Both Sides check box.
11. Click Save.
12. Click Apply.
13. Click Save or Submit.
1. Open the job parameters window of your job.
2. Click Exceptions.
3. Select the exception that you want to delete.
4. Click Remove.
A command is a standard PostScript command
setpagedevice
that is embedded in a file and enables you to print a complex job
that contains paper of varying size, coating, weight, and so forth.
Such commands indicate that the printer must switch media during
the printing of a job. When a job is RIPed, the CX print server
identifies the
setpagedevice
selected types of paper. The printer then uses those types of
paper for the job.
Page exceptions and inserts that include
commands are called dynamic page exceptions. The CX print
server supports dynamic page exceptions for the following file
formats:
PostScript
●
VPS
●
PDF
●
Requirements:
A file with embedded
1. From the Tools menu, select Resource Center.
2. In the Resource list, select Virtual Printers and either create
a new virtual printer or edit an existing one.
3. Select the Support dynamic page exceptions check box.
commands and maps them to the
commands.
setpagedevice
setpagedevice
69