Calibration Table Info Graph Tab; Adding An Entry To A Calibration Table - Xerox CX PRINT SERVER 550 User Manual

Calibration table Info Graph tab

Calibration table Info Graph tab

Adding an entry to a calibration table

Minimum Accepted
The minimum measured value of the output density that
is accepted for correction.
Properties—The parameters that were selected when the
●
calibration table was created.
During printing, the CX print server automatically replaces the
CMYK values in the RTP file with new values that compensate for
the printer's current performance level.
This tab includes the following:
Separations
The graph displays cyan, magenta, yellow, and black
separations. You can see information about each
separation by clicking the desired separation button. Or you
can view all the separations together, by clicking the button
that shows all four colors.
Output Density
The vertical axis represents the dot percentage values of
the final output data (after applying the calibration table)
that is sent to the printer.
Input %
The horizontal axis represents the dot percentage values of
the RTP file.
You can review a calibration table to make sure that the curves
are relatively smooth and continuous. If you are not satisfied with
the results, the Editor tab enables you to adjust the values of the
image in the value table.
1. From the Tools menu, select Resource Center.
2. In the Resource list, select Calibrations.
3. Select the calibration table that you want to add an entry, and
click the Editor tab.
4. From the Separation list, select the desired separation to that
you want to add an entry.
The file and printer values for the separation that you selected
appear in the File Value and Printer Value lists.
5. Select a row in the value table, and click the Add button.
51