Xerox CX PRINT SERVER 550 User Manual page 114

104
Parameter
Spot color
Option
Emulate source
paper tint
RGB source
profile
RGB rendering
intent
Apply CMYK
emulation
Destination Profile
Spot color
Description
Emulates the original paper tint if the tint is included in the
profile.
Notes:
● If you select Emulate source paper tint, you cannot
select Preserve pure CMY colors.
● If the job is simplex, only the front side will be printed
using the tint emulation.
● If you select Emulate source paper tint, Absolute is
used as the rendering intent.
Enables you to select an RGB source profile.
Provides the following options (for information on each
option, see the descriptions of the CMYK rendering intent
options in this table):
Auto
●
● Relative
Absolute
●
● Saturation
Perceptual
●
To convert RGB elements according to the selected CMYK
emulation method, select the Apply CMYK emulation. The
RGB elements receive the same look as the CMYK
elements, creating a unified appearance.
Provides the following options:
● Linked—Uses the destination profile that was linked
using the Media and Color Manager in the Resource
Center.
Xerox560
●
Provides the following options:
● Spot Dictionary—Applies the CMYK values that are
defined in the spot color dictionaries. You can edit these
values using the Spot Color Editor tool. The spot color
dictionaries supported are: HKS, DIC Color Guide,
Pantone, Pantone GOE, Pantone Plus, and TOYO.
Refer to the Spot Color Editor window for the complete
list.
Original file values—Uses the CMYK values from your
●
file.
● Destination Profile—Uses the destination profile that is
selected under Color > Color Flow, and applies it to the
spot CMYK values.
Chapter 11—Job parameters