Booklet Printing - Xerox 4110 Customer Release Notes

Booklet printing

T
O PRINT A BOOKLET FROM
Printing a booklet from Microsoft Word on Windows (PostScript printer driver)
Booklet printing requires that a finisher is installed on the printer and that the printer driver is
configured with the installed finisher. For information about configuring installable options,
see Printing from Windows.
The following procedure explains how to set the correct print options for printing an 8.5
Microsoft Word document as a booklet on 11
as a booklet on A3 paper, using the Windows PostScript or PCL printer driver.
N : If you print multiple copies of a booklet, make sure the Collate option in Microsoft
OTE
Word is cleared. Otherwise, all the copies print as one booklet.
M
ICROSOFT
1 Open the document in Microsoft Word.
2 Select File >Page Setup.
3 Set the Paper Size to 8.5x11 SEF (A4 SEF) and Orientation to Portrait.
N : This step might change the appearance of the text on the page.
OTE
4 Select File>Print, choose the Fiery EXP4110 as your printer, and then click Properties.
5 In the Fiery Printing tab, open the Paper Source bar and choose the following settings:
8.5 11 SEF (A4 SEF)
Page Size: x
11 17 SEF (A3 SEF)
Print Size: x
6 Open the Layout bar and choose the following setting:
Portrait
Orientation:
7 Open the Finishing bar and choose the following settings:
Top-Top
Duplex:
Face Up
Face-down Printing:
Fasten Mode: Fold or Fold and Staple
N : For the limitations on folding and stapling, see "Centering Adjustment and Creep
OTE
Adjustment and booklet printing" on page 19.
Booklet Output Tray
Output Tray:
Saddle
Booklet Maker:
Booklet Best Fit: Select this option
17 paper, or for printing an A4 document
x
W W
ORD USING THE INDOWS
P S
OST CRIPT PRINTER DRIVER
Part Number: 45051581
Page 16
11
x