Xerox CX PRINT SERVER 550 User Manual page 18

8
default virtual printers are published on the network with specific
parameters set for processing and printing.
The default virtual printers are:
ProcessPrint—Files sent to this printer are automatically
●
processed and immediately sent to the printer for printing.
ProcessStore—Files sent to this printer are automatically
●
processed and stored in ready-to-print (RTP) format in the
Storage area. Later, you can submit an RTP job for printing, or
change the parameters of the job and resubmit it for processing
or printing.
SpoolStore—Files sent to this printer are spooled to the
●
Storage area and wait until you submit them for processing
and printing. The files remain in PDL format (such as PS, PDF,
VPS, and PPML).
Print Driver software
Use the Print Driver software to set job parameters when you are
submitting a job to the CX print server from any application in your
computer. The Print Driver software provides a graphical user
interface that is similar to the CX print server job parameters
window. The software is automatically installed on a Windows
computer when you set up a network printer.
Note: On a Mac computer, you must install the Print Driver software
manually.
In the Print Driver window, you can perform the following actions:
Define or change job parameters regardless of whether your
●
computer is connected to the server
Lock a job for secure printing
●
Save a set of parameters. Sets are useful when you want to
●
print different jobs with the same parameters, or if you want to
reprint a job.
Retrieve a saved set of parameters
●
Check the status of the printer
●
Define PostScript parameters for the job
●
Preview imposition layout
●
Chapter 2—Setting up your computer for printing