Advertisement
This is the installation and registration guide for CET Meter which referred to as MB-63 or
6M+One device on our system. Throughout the rest of the document, the device will be
addressed as CET Meter.
Installation guide
(Link for the SLDs: h ttps://drive.google.com/drive/folders/1SK--jg-cPQgHH2JOm3B7fxpZGIdwI27G )
1. WARNING
DO NOT power-up the Solar Analytics device before/simultaneously with the CET Meter.
It has to be powered up after the CET Meter.
2. The s equence
○ DO NOT power-up the Solar Analytics device before/simultaneously with the CET
Meter. It has to be powered up after the CET Meter.
○ Install the CET device accordingly
○ Establish the Modbus connection from the CET device to the MB-63 device
○ Power up the CET device
○ Power up the Solar Analytics device
3. What device are we dealing with?
○
PMC-220
○
○
PMC-220
4. PMC-220
○ Hardware installation
i.
— straight-through connection.
— straight-through connection.
— 3P4W method: using the White CTs.
Straight through connection
PMC-340-BA
PMC-340-BB
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CET PMC-220
Summary of Contents for CET PMC-220
- Page 1 This is the installation and registration guide for CET Meter which referred to as MB-63 or 6M+One device on our system. Throughout the rest of the document, the device will be ...
- Page 2 MB-63 Modbus B (+) and A (-) are to be connected to Terminal 8 and 7 respectively... ○ Configuration This device relies on the MB-63 device for its timestamp. ...
- Page 3 P1 to V1 should be very close to 0 and so on. Troubleshooting Purchase a U SB to RS-422/485 cable Download the P MC software Wire USB adaptor to CET meter and plug it into your computer to diagnose the issue ...
Need help?
Do you have a question about the PMC-220 and is the answer not in the manual?
Questions and answers