Connecting To Field Devices - National Instruments Compact FieldPoint cFP-21 Series User Manual

Chapter 2 Installing Compact FieldPoint Hardware and Software
2
1
2
1 cFP I/O Module
2 Captive Screws

Connecting to Field Devices

cFP-21xx and cFP-BP-x User Manual
Figure 2-14. Installing an I/O Module on the Backplane (cFP-BP-4 Shown)
4. Repeat this procedure to install additional I/O modules on the
backplane.
Use cFP-CB-x connector blocks or Compact FieldPoint cabling accessories
to connect the I/O modules to field devices. Refer to the operating
instructions for the I/O modules, connector blocks, and cabling accessories.
3
3
3 Screw Holes
4 cFP-BP-4 Backplane
2-14
4
ni.com