Dip Switches - National Instruments Compact FieldPoint cFP-21 Series User Manual

DIP Switches

© National Instruments Corporation
The following figure shows the DIP switches on the front of the cFP-21xx.
Compact FieldPoint
cFP-2120
Figure 3-1. cFP-21xx DIP Switches
DIP switches 3 and 4 are user configurable on the cFP-21xx.
Switches 1 and 2 are user configurable on the cFP-2100 and cFP-2110
but are disabled on the cFP-2120. FieldPoint LabVIEW VIs, CVI, OPC,
Lookout, and other applications can read these switches, but the switches
have no default functionality.
DIP switches 5, 6, 7, and 8 are the CONSOLE OUT, DISABLE VI,
SAFE MODE, and RESET IP switches. The cFP-21xx reads these switches
only when powering up or rebooting. You must reboot the module with one
of these switches ON for its setting to take effect.
POWER
STATUS
A
B
C
D
RESET
C
V1
V2
3-5
Chapter 3 Feature Descriptions
cFP-21xx and cFP-BP-x User Manual