Service And Maintenance Work; Statutory Inspection; Preventive Measures - Hardi NK SB Series Instruction Book

Service and Maintenance Work

Statutory Inspection

A surveyor must complete a statutory inspection of the tractor and sprayer prior to connecting the two. However, the rules
often allow the tractor and the sprayer to be inspected separately before being connected.
Each country should regulate the level and frequency of this inspection. Contact your local HARDI dealer for more
information, before using the sprayer the first time.

Preventive Measures

Before carrying out service and maintenance work, secure all media against unintentional start-up. This goes for:
Hydraulic system
• set the tractor's hydraulic levers in neutral position to relieve oil pressure
• turn off the tractor and remove the ignition key
• dismount the hydraulic hoses connected from the tractor to the sprayer.
Electric system
• turn off the tractor and remove the ignition key
• dismount the electric cables from the tractor's battery.
Fluid system
• turn off the tractor and remove the ignition key.
Compressed air
• turn off the tractor and remove the ignition key
Carry out prescribed service, maintenance and inspection work in due time. This will help to eliminate faults on the sprayer,
including safety related functions.
Carefully fix and secure larger components to lifting gear when carrying out replacement work.
Check all the screw and bolt connections for firm seating. On completion of the maintenance work, check the function of the
safety devices.
2 - General Safety Instructions
23