Preparation For Shipment Or Storage; Preparation For Reshipment; Preparation For Storage - Ten-Tec RX-340 Technical Manual

PREPARATION FOR SHIPMENT OR STORAGE

7-1 PREPARATION FOR RESHIPMENT: If the Model RX-340 ever needs to be
packaged for reshipment, it is recommended that the following steps be taken:
1. Remove all cords or cables attached to the unit
2. Ensure that there is sufficient bubble packing material in the shipping carton to
protect the unit from any hard impact that may occur during shipment
3. Place the unit in the center of the shipping carton.
4. Cover the unit with bubble packing material.
5. If using a cardboard packing carton, securely tape the seams of the carton's top
cover, bottom cover, and side flaps with reinforced tape.
6. Fasten labels or stamps.
7. With indelible ink, write the word FRAGILE on the top, bottom, and all sides of
the carton.
7-2 PREPARATION FOR STORAGE: If the Model RX-340 is not going to be used
for a long period of time, it should be stored in its shipping case or some other suitable
carton. The unit is rated for storage at temperatures from -50°F to 1600°F. To prepare
the unit for storage perform the following steps:
1. Remove all cords or cables attached to the unit.
2. Ensure that there is sufficient bubble packing material in the container.
3. Place the unit in the center of the packing container.
4. Cover the unit with bubble packing material.
5. If using a cardboard packing carton, securely tape the container with reinforced
packing tape.
6. Fasten labels or stamps.
7. With indelible ink, write the word FRAGILE on the top, bottom, and all sides of
the container. Also, write the Model No. and quantities in large characters on top
of the carton.
CHAPTER 7
7-1