Table of Contents
Advertisement
1. To Recall a channel while scrolling: To recall a displayed channel, simply press the
Recall button. The selected channel will load into the receiver and become active.
Pressing Recall cancels the Scroll function, so you must press the Scroll button again if
you elect to resume scrolling. Push and hold tune to monitor Tune to write text.
2. To Store a channel while scrolling: To overwrite a menu entry with the frequency in
current use, press the Store button. The display will present a request for confirmation
(this is done to prevent accidental overwrites):
If you wish to complete the overwrite, press Store one more time. The old information
will be overwritten and the current operating frequency will replace it. Also, the display
will revert to channel-menu format:
If you do not wish to complete the overwrite when the confirmation message appears,
press 'C' twice on the main keypad to escape and restore the channel-menu.
4-32 Using the Tune Function to Access Frequencies from the Channel Menu: Like
the Scroll function, the Tune function may be used to view the listing of occupied
channels stored in the receiver's channel menu. However, as each entry appears in the
menu window, it will also be temporarily activated to permit monitoring. Note that Tune
selections are not fully recalled in that the main displays do not change and receiver
settings may not be altered by the front panel controls.
To tune through the channel menu, press the Tune button. It will illuminate and the
Memory/Scan Edit Knob will be assigned to the tune function. Rotate the Edit Knob to
the channel you wish to clear, as shown below:
1. To Recall a channel in Tune mode: To fully activate a channel while in Tune mode,
press the Recall button. The selected channel will load and become fully activated.
Pressing Recall cancels the tune function, so you must press the Tune button again if you
elect to resume tuning via the Edit Knob.
4-17
Advertisement
Table of Contents
