Table of Contents
Advertisement
4-30 TO RECALL A SPECIFIC CHANNEL FROM MEMORY: This function is
used to recall a specific channel number from the menu, and to make it the receiver's
current operating frequency. To enter the Recall mode:
1. Press the Recall button. 'Recall Chan - - -' and 'Select Channel' will appear in the
Memory/Scan display:
2. Enter the number of the channel you wish to recall on the Main Keypad. The number
you enter will appear in the top line of the Memory/Scan display (example, enter 25):
3. Press the Recall button again. The Memory/Scan display will show 'Channel 25
Recalled' for approximately two seconds, and then present the channel number and
operating frequency in menu format. Simultaneously, the receiver's other displays will
shift to the recalled channel settings and the receiver will operate on the recalled channel:
Important Note: Once a channel has been recalled, you may tune the receiver and adjust
its operating parameters normally. However, these amended settings will not be retained
in memory unless you activate the Store function and overwrite the old ones.
4-31 USING THE SCROLL FUNCTION TO PREVIEW THE CHANNEL MENU:
The Scroll function is used to preview the listing of occupied channels stored in the
receiver's channel menu.
To scroll through the channel menu, press the Scroll button. The Scroll button will
illuminate and the Memory/Scan Edit Knob will be assigned to the scroll function. Rotate
the Edit Knob to preview menu contents, as shown:
4-16
Advertisement
Table of Contents
