Table of Contents
Advertisement
4-27 STORE THE CURRENT OPERATING FREQUENCY IN A SPECIFIED
CHANNEL (1-100): This function is used to Store the current operating frequency
under a memory-channel number of your choice. To enter the Store mode:
1. Press the Store button. 'Store Channel - - - 'will appear in the top line of the
Memory/Scan display and 'Select Channel will appear below:
2. Compose any channel number between 1 and 100 (your choice), and enter it on the
receiver's Main Keypad (example: enter 25). This number will appear on the
Memory/Scan display, as shown below:
Important Note: When using keypad entry, if the channel number chosen is already
occupied, a new entry will overwrite the existing one without notification. If you are
concerned about overwriting an occupied channel by mistake, check the channel menu
using the receiver's scroll mode to ensure the slot chosen is empty (See section 4-31).
3. To complete the entry, press the Store button a second time. This enters the receiver's
current frequency, mode, and basic Aux/Parameter settings into channel number selected.
Upon entry, the Memory/Scan display will change to show the channel, operating
frequency, mode, and bandwidth in normal channel-menu format:
Important Note: You may exit the 'Store Channel - - -', function at any time and resume
normal receiver operation without completing an entry-in-progress. To escape, press 'C'
(Clear) on the main keypad. Pressing the 'C' key will terminate most other Memory-
Scan programming functions, as well:
4-14
Advertisement
Table of Contents
