Table of Contents
Advertisement
2-10
Standard Roll Feed
Operating mode (F6)
F1 Operating mode selection (Password Protection Level 1 possible
If the F6 is pressed in the main menu, then an operating mode is pre-
selected and the currently valid mode displayed. The contrast can also be
changed here. The following display appears.
F1 = operating mode selection
F2 = current operating mode
F3 = contrast setting
If F1 has been actuated, then it is possible to select an operating mode in
single steps in set-up mode and automatic mode. If one of the following
menus is selected, then complete programs are transmitted into the ELC.
The following appears:
Operating mode selection
F1 = single step in
set-up mode
F2 = automatic mode
If F1 single step in set-up mode is selected, then the following appears:
Operating mode selection
F1 = feed before
press (VvP)
F2 =press before
feed (PvV)
The F1 and F2 keys can be now used to select an operating mode and to
transmit the relevant program into the ELC. The message that the se-
lected operating mode has been transmitted comes after about five sec-
onds.
Application
DOK-SUPPL*-BTV04*ELW**-AW01-EN-P
Hide quick links:
Advertisement
Table of Contents
