Step 14: Installing The Motor - Mountain Models Flashback Manual

Step 14: Installing the Motor

We recommend the GWS EPS400C-C for the motor.

You will need:

•

Motor (not provided with kit)

•

#2 x 3/8" screw (Bagged Parts)

Installing the Motor

Slide the gearbox through the motor mounts with the spinner facing forward. Make

sure that it's FULLY seated.

Using the round hole provided in the bottom of the fuselage, use a 1/16" drill bit to go

through the gear box and the plywood motor mount.

Screw in the motor retaining screw.

Step 15: Attaching the Receiver and Speed Controller

We are not going to cover the receiver and speed controller (ESC) specific information,

please refer to your manufacturer's instructions for more information, if necessary.

Mountain Models Flashback

Table of Contents