Advertisement
!
Assembling and attaching the cowl
Sand the front of the F1 bulkhead to create a smooth and flush surface for the cowl
1.
balsa.
Glue the three 1/4" balsa cowl pieces together. Notice that the smallest is on top and
2.
slightly staggered, while the largest is on the bottom and is more staggered.
Center the cowl pieces onto the F1 bulkhead, and then glue them into place.
3.
Sand the front of the cowl to give it a nice rounded look.
4.
Step 3: Assembling the Wings
Once you've finished building the fuselage, you can begin assembling the wings. You
have now completed one large step for your plane, and one small step...well, you know
the rest...
Assembling the Wing Spars and the Trailing Edge
For this section, you are going to assemble the vertical spars, the top and bottom spar
caps, and the leading edge.
Mountain Models Flashback
27
Advertisement
