Acorn 80 Installation Manual page 7

1 Fit the legs (L) to the first sloping section of rail (R) or to the hinged section if fitted, as indicated on the
installation drawing. Insert the screw (S) through the leg clamp (C) and the hole in the top of the leg. Fasten
together with a nut on the screw.
2 Check the angle (A) of the first rail section with the installation drawing. Ensure face of rail is 90˚. If
necessary the legs can be adjusted for height, by screwing the leg up or down in the leg tube, to obtain the
correct angle. See sample drawing.
WHEN INSTALLING, INTERNAL OR EXTERNAL, 90˚ OR 180˚ WRAP ROUND SYSTEMS, IT IS
IMPORTANT TO ENSURE THAT ALL THE RAIL ANGLES AND SECTIONS ARE CORRECT.
ACORN 80 Installation Manual
SECTION 3
Rail Installation
7