Rail Installation; Rail Sections - Acorn 80 Installation Manual

SECTION 3

Rail Installation

IF THE CARPET ON THE STAIRTREAD IS NOT FULL WIDTH, THEN MAKE THE CUSTOMER
AWARE THAT THE FOOT OF THE LEG WILL BE PUSHED UNDER THE CARPET. IT IS THE
CUSTOMERS RESPONSIBILITY TO HAVE A CARPET FITTER CUT THE CARPET TO FIT, OR FIT
Joining the rail
The stairlift rail is shipped in several pieces. Refer to the installation drawing that all pieces are correct and
marked as per drawing. Check correct number of legs are supplied.
Tighten the rail fixings to the recommended Torque settings - see Appendix 2.

Rail Sections

(viewed from wall side of lift)
R
Rail Section
TJ Top Joint Box
BJ Bottom Fixing Plate
P Pull Plate
C
Countersink Screws
G Grub Screws
6
RAIL INSTALLATION
MAXIMUM LENGTH OF RAIL.
DO NOT EXCEED 25M, THIS IS THE LONGEST RAIL RECOMMENDED.
AN INLAID PIECE. WE DO NOT CUT CARPET.
ACORN 80 Installation Manual