Acorn 80 Installation Manual page 68

APPENDIX 10
Rationalisation Procedures
5 The inside of the seat should look like this, with 1 arm harness feeding one arm only, and the On/Off
harness securely looped in position using self adhesive cable clamps.
ARM HARNESS WILL ONLY SUPPLY ONE
6 Re-assemble back cover insert and lower back cover by securing in position with the 8 screws
removed previously.
68
ARM (ROCKER SWITCH)
SECURE IN POSITION
WITH 8 SCREWS
SEAT TO NEW
REVISION
ACORN 80 Installation Manual