Acorn 80 Installation Manual page 46

APPENDIX 10
Rationalisation Procedures
7 Secure the seat spacer assembly with the 4 x M8
x 20mm Socket Cap Head screws 902100 that
were supplied with spacer.
8 Reconnect the Seat interlock harness onto the
board as shown and secure the harness in place
with 4 x Tie wraps.
RECONNECT HARNESS
TO MAIN PCB
9 Secure front cover back onto the mainframe.
10 Reposition the seat onto the carriage, Reconnect
carriage harness and secure Lower back cover
and back pad back onto the seat.
46
HARNESS WIRING FED CORRECTLY
THROUGH THE MAINFRAME CASTING
REMOVE 4 x M8
SECURE WITH 4x
x 20 SCREWS
901200
TIE WRAPS
ACORN 80 Installation Manual