Changing The Programme Sequence; Changing A Programme (Safety Lock); Cancelling A Programme; Interrupting A Programme - Miele WTR 860 WPM Operating Instructions Manual

Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected options cannot be changed
once the machine has been success-
fully started. This prevents the machine
being operated unintentionally, e.g. by
children.
If the washer-dryer is switched off dur-
ing active programme operation, the
standby function does not switch the
washer-dryer off completely after
15 minutes. Safety functions continue
to be active because there may still be
water inside the drum.

Cancelling a programme

You can cancel a programme at any
time after it has started.
 Touch the Start/Stop sensor control.
The following will appear in the display:

Cancel the programme?
 Select
Yes .
- During washing:
The washer-dryer pumps the suds away
and the programme is cancelled.
- During drying:
The washer-dryer cools the laundry
down before the door can be opened.
Removing the laundry
 Wait until the  symbol in the display
goes out and the door is unlocked.
 Pull the door open and unload the
laundry.

Changing the programme sequence

Selecting another programme
 Close the door.
 Select the programme you want to
use.
 Add detergent to the detergent
drawer, if necessary.
 Press the Start/Stop button.
The programme will start.

Interrupting a programme

 Switch the washer-dryer off with the
 button.
 To continue the programme, switch
the washer-dryer back on with the
 button.

laundry
Hot laundry can ignite.
Never switch the washer-dryer off
during a drying programme.
If you absolutely must interrupt the
programme, remove all items imme-
diately and spread them out to cool
down.
Danger of overheating due to hot
73