Extended Cool Down; Network; Miele@Home - Miele WTR 860 WPM Operating Instructions Manual

Settings

Extended cool down

The cooling down phase which takes
place before the end of a programme
can be extended if required. This cools
the garments down even more. The
cooling down phase can only be ex-
tended if a drying level has been se-
lected. Extended cool down is not act-
ive for timed drying.
The extended cool down time can be
set between 0 min (factory default) and
18 min.
118

Network

Miele@home

Control the networking of your
washer-dryer with your home WiFi
network.
Options
-
Set up
This message only appears if the
washer-dryer has not yet been con-
nected to a WiFi network.
Please refer to "Before using for the
first time" for instructions on how to
set up the connection.
- Deactivate
The setting is only visible if
Miele@home is activated.
Miele@home remains set up, the WiFi
function is switched off.
- Activate
The setting is only visible if
Miele@home is deactivated.
The WiFi function is reactivated.
- Connection status
The setting is only visible if
Miele@home is activated.
The WiFi reception quality, network
name and IP address are displayed.
- Set up again
The setting is only visible if
Miele@home is set up.
Resets the WiFi login (network) to im-
mediately re-establish a new connec-
tion.